The RedTender brief, no. 1: 16 October 2026

AI and robots on site

Every entry we track was checked at its source on 16 October 2026. We report what the makers and independent sources publish; we have not tested these machines ourselves.

New

HP SitePrint: A small robot, guided by a total station, that prints the setting out from the drawings straight onto the slab. On sale in the UK and Ireland since 2023, with Skanska named as an early user; the setting-out robot a UK sub is most likely to see first. HP claims about ten times the speed of a two-person crew.

FieldPrinter 2: Drives itself across the slab printing full-size setting-out lines, points and text from the drawings. Listed for North America only; not offered in the UK on the maker's own page. Maker's claimed accuracy: 1.6 mm.

Jaibot: Reads the drilling plan from the BIM model, then marks and drills overhead fixing holes for M&E on its own. Sold through Hilti with no published price; used in Sweden, Switzerland, the Netherlands and Czechia per Hilti UK, but no UK job found. Only useful where the job has a coordinated model to drill from.

MULE: A lift-assist arm that takes the weight of heavy blocks so the mason only guides them into place. A handling aid rather than a bricklayer; demo-only on the maker's site, with no UK presence found. The maker's customers report block jobs finished days early.

Hadrian: A truck-mounted robot with a long boom that lays large blocks with adhesive to build a house's walls from the design. Real, but far from a UK site: priced in the millions, built around large-format blocks rather than UK brick, and its maker is restructuring towards licensing. One to watch, not to plan for.

TyBot: A gantry that spans the deck and ties the rebar crossings by itself, with one person supervising. Built for US bridge and road decks, not building slabs; on sale since 2024, with no UK use found. Claimed over 1,200 ties an hour.

Spot: A four-legged robot that walks the site carrying a scanner or camera to record progress against the model. Bought by main contractors and clients, not subs: if one walks your area, it is recording your progress. About 90 minutes a charge, per the maker.

Brokk demolition machines: Compact tracked demolition machines with a breaker or crusher arm, driven by remote control from a safe distance. Established kit, not an experiment: a UK company with a London depot and service team. The remote-controlled machine a demolition sub is most likely to own or hire.

CivDot+: A small rover that drives to each design coordinate and sprays a mark, replacing a crew putting in pegs. Aimed at solar farms and battery sites; European countries are named on its site, but not the UK. Claimed accuracy 8 mm.

RPD 35 piling robot: A self-driving rig that carries and drives the piles for solar-farm frames, with no one in the cab. Solar piling only, in the US and Australia; the maker's earlier self-driving excavator kit no longer appears on its site. Not one for UK groundworks yet.

LIFTBOT: A battery hoist that runs up the scaffold carrying tube, boards and materials, so nobody hand-balls them up. Used on a 72 m London scaffold, per the maker; mostly sold into industrial plant and shutdowns. Priced by quote.

Human Detection System: AI cameras on the plant that spot a person in the danger zone and stop the machine slewing and tracking. The AI most likely to reach your plant first: Balfour Beatty has required people-detection cameras on its UK sites' heavier plant since 2024 and said it would extend it to the supply chain. Spillard's is fitted on Cementation Skanska's rigs.

Buildots: Cameras on hard hats film the site on normal walks, and AI compares what is built with the model and the programme. Main contractors' tool, in use in the UK (Sir Robert McAlpine named it a preferred partner in 2023): it shows your progress to them, package by package, whether you use it or not.

OpenSpace Track: A walk with a 360-degree camera, after which the software works out how far each task has got against the programme. Another main contractor's progress tracker, with a UK data region and links to Asta Powerproject: your progress against their programme, measured from photos.

Procore AI agents: Assistants inside Procore that search drawings and specs, check submittals and RFIs, and draft daily logs, with a person approving. If your main contractor runs the job in Procore, your submittals and RFIs may be checked by these before a person reads them; in beta at May 2026, wider release expected. Procore's Groundbreak conference (20 to 22 Oct) may change this entry.

Autodesk Assistant and AutoSpecs: AutoSpecs reads the specification and builds the submittal list; the Assistant answers plain-English questions about a job's RFIs, changes and programme. On jobs run in Autodesk Build, the submittal list you answer may have been drawn up by AutoSpecs: check it against the spec yourself before you rely on it.

The full list: every entry we track, with its source and the date we checked it.

Every issue · Get the next one